Create an Event - AI Face Swap
Step 01: Mode Settings
Select “Multifunctional Mode”. After making your selection, select the “Face Swap” button from the options below.
Step 02: Camera Settings
In the "Camera Settings" section, select the camera type you want to use from the "Select Camera Type" box. When you connect your camera to your computer, it will appear in the "Select Camera" box. (If it does not appear, check that your camera is on and connected to your computer and try again.) After selecting your camera, adjust it according to your horizontal or vertical use from the "Camera Rotation" section.
In the “Shooting Options” section, activate the Photo button. If you want to use existing photos on your device, you can also activate the “Desktop Editing” button.
Step 03: Shooting Settings
In the "Countdown Seconds" section in the "Camera Settings", after you give the take photo command, it shows the time it takes for you to see yourself on the screen and adjust your pose. In short, you can set your photo timer from this section.
Step 04: Image Template Settings
The “Image Template Settings” section is the interface used to adjust the size and position of the photos taken and to add digital frames and stickers.
In the “Output Size” section, you can determine the dimensions of your photo. If you are going to print from a printer, we recommend that you enter the dimensions of your printing paper as 6x4 or 6x8. If you are going to do only digital work, you can also consider the other options of 1280x1280, 1080x1920 or 1280x720.
To add digital frames and stickers to your photos, click the "Add Image" button above.
In this section, select the horizontal or vertical frame you want to use and press the "open" button.
If the frame you add is the same as your “Output Size” measurements, it will fit automatically. You can make all the fine adjustments from the red marked panel.
If you want to add more than one frame, you can add them to the template pages at the top.
Step 05: Face Swap Gallery
There are images available in the software in the "Face Swap Gallery" section. You can use these images or add new ones if you wish.
When you scroll down to the bottom of the Face Swap Page, click on the marked button and select the image you want to add.
It automatically recognizes and marks faces in the image you have added. If there is more than one face in the image you have added, you can disable the faces you do not want to change by clicking on them once.
Fill in the “Title” section as you wish.
After making all the adjustments, click the “Start the App” button.
Step 06: Start the App
When you enter the “Start the App” section, you will be greeted by this screen. Click the “Photo” icon once.
After taking the photo, I click the Face Swap button in the upper left corner.
On the page that opens, select the image you want to face swap.
You can get it by Print, E-Mail, SMS or scanning the QR code on the right.
Press the "DONE" icon to return to the shooting screen.
When you click on the “Gallery” icon, you can access the images you have previously taken.