Create an Event - PhotoBooth Photo Mode

Step 1: Mode Settings

Select “Multifunctional Mode”. After making your selection, check the “Photo” box from the options below. If you are going to use existing photos on your device, you can also check the “Desktop Editing” box.

Step 2: Camera Settings

In the “Camera Settings” section, select the camera type you want to use from the “Select Camera” box. When you connect your camera to your computer, it will appear in the “Select Camera” box. (If it does not appear, check that your camera is on and connected to your computer and try again.) After selecting your camera, you can adjust it according to your horizontal or vertical use from the “Camera Rotation” section.

Step 3: Shooting Settings

In the "Countdown Seconds" section in the "Shooting Settings", it shows the time it takes for you to see yourself on the screen and adjust your pose after you give the take photo command. In short, you can set your photo timer from this section.

Step 4: Image Template Settings

The “Image Template Settings” section is the interface used to adjust the size and position of the photos taken and to add digital frames and stickers.

In the “Output Size” section, you can determine the dimensions of the photos. If you are going to print from a printer, we recommend that you enter the dimensions of your printing paper as 6x4 or 6x8. If you are going to do only digital work, you can also consider the other options of 1280x1280, 1080x1920 or 1280x720.

To add digital frames and stickers to your photos, click on the "Add Image" section above.

In this section, select the horizontal or vertical frame you want to use and press the "open" button.

If the dimensions of the frame you added match your “Output Size” settings, it will automatically fit.

If the frame you add is the same as your “Output Size” measurements, it will fit automatically. You can make all fine adjustments from the red panel.

If you want to add more than one frame, you can add them to the template pages at the top.

If they are different sizes, click on your frame once from the “Layers” section. Enter the “Output Size” measurements in the “Image Properties” section and make sure your frame fits the image perfectly.

Step 5: Start the Apps

Your photo will be taken after the countdown screen you set.

After the photo shoot, your image arrived with the frame you added.

You can get it by Print, E-Mail, SMS or scanning the QR code in the section on the right.

Press the "DONE" icon to return to the shooting screen.

When you click on the “Gallery” icon, you will access the images you have previously taken.

To go back to the “Settings Menu”, simply click on the “F11” key, or for touchscreen users, click on the top right corner 5 times in a row.