Create an Event - Green Screen
Step 1: Mode Settings
Select “Multifunctional Mode”. After making your selection, select the “Photo” option from the options below.
Step 2: Camera Settings
In the “Camera Type Settings” section, we select the type of camera we want to use from the checkbox labeled “Select Camera Type.” When you connect your camera to your computer, it will appear in the checkbox labeled “Select Camera.” (If it does not appear, check that your camera is on and connected to your computer, then try again.) After selecting your camera, you can adjust the orientation “Camera Rotation” according to your horizontal or vertical usage.
Step 3: Green Screen Settings
After activating the “Green Screen Settings” box, some settings will open to remove the background.
In the color palette on the right, the green color is selected by default. If we consider the environment and light factor you are in, you will have a difference in green tone.
For this reason, click the “Take Test Photo” button in the “Test Photo” section.
After taking the test photo, you can make manual adjustments using the color palette on the right or click once on the color you want to lose on your image.
The software will automatically remove the background.
You can make a more precise adjustment by increasing or decreasing the value of 100 in the “Threshold” section.
Step 4: Shooting Settings
In the "Countdown Seconds" section in the "Shooting Settings", it shows the time it takes for you to see yourself on the screen and adjust your pose after you give the take photo command. In short, you can set your photo timer from this section.
Step 5: Template
The “Template Settings” section is the interface where we can adjust the dimensions and positions of the photos we take, assign visuals to the background, and add digital frames and stickers.
In the “Output Size” section, you can determine the dimensions of your photo. If you’re going to print, we recommend entering the dimensions of your print paper, such as 6×4 or 6×8. If you’re only doing digital work, you can also consider the other options, such as 1280×1280, 1080×1920, or 1280×720.
To add an image to the background of your photo, press the “add image” button.
After you find your image on your computer, click on your image once and press the "open" button.
If the image you use is the same as your “Output Size” dimensions, it will fit automatically.
If the dimensions are not the same, click on the image once in the “Template Layers” panel.
In the “Image Properties” section, enter the same values as the “Output Size” dimensions for the width and height dimensions.
After entering the values, your image will fit exactly as it does in the template preview section.
Go back to the “Template Layers” section and click once on the image you added. Then, use the arrow icons below to move it to the top layer. Thus, as seen in the picture above, you will have placed the person in front of our background.
From the “Template Layers” section, this time click on the “Captured Photo” section. Then, manually from the template preview section or by entering values from the “Image Properties” section, adjust the position of the photo to be taken on the background.
To add a digital frame and sticker to your photos, click on the “Add Image” section above.
If the frame you added is the same as your “Output Size” measurements, it will fit automatically.
If it is in different sizes, click on your frame once from the “Template Layers” section. Enter the “Output Size” measurements in the “Image Properties” section and make sure your frame fits the image perfectly.
After completing all these adjustments, click the “Start the Apps” button.
Step 6: Start the Apps
When you enter the “Start the App” section, you will be greeted by this screen. Click the “Photo” icon once.
After the countdown screen you set, your photo will be taken.
After the photo shoot, your image has arrived with the background and frame you added.
You can get it by Print, E-Mail, SMS or scanning the QR code in the section on the right.
Press the "DONE" icon to return to the shooting screen.
When you click on the “Gallery” icon, you will access the images you have previously taken.
To go back to the “Settings Menu”, simply click on the “F11” key, or for touchscreen users, click on the top right corner 5 times in a row.